Ambrosia Filament's line of Polycarbonate blend filament are designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.
Polycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.
Feed your Printer the Filament of the Gods.
PC-ABS (polycarbonate + acrylonitrile butadiene styrene) combines advantages of PC filament with easier printing. The filament both provides better mechanical properties and heat resistance than ABS with printability only marginally tougher.
Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
Derived from 100% Virgin (Grade-A) non-toxic pellets
Diameter: 1.75mm (+/-0.03mm)
Filament Net Weight: 1KG
Spool Weight: 130G
The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).
Ambrosia Filament's Recommended Print Settings for our PC-ABS filament:
Attribute
Accepted Value(s) [Our Recommended Value]
Extruder Temperature
250-280 Degrees Celsius [270]
Heated Bed
100-115 Degrees Celsius [110]
Build Surface
PEA, PEI, Buildtak, or similar surface [Smooth PEI or PEA with adhesive]
Cooling Fan
0-70% range varies by cooling capabilities
Environmental Temperatures
40-120C [60C]
Soluble Support Materials
HIPS or other Water Soluble Support Material
Technical Specifications for our PC-ABS Filament:
Physical Properties
Test Methodology
Values
Density
ISO1183
1.14-1.15g/cm3
Melt Flow Rate (250C/2.16KG)
ISO 1133
19-22g/10min
Moisture Absorption (23C/24h)
ISO 62
<0.8%
Mechanical Properties
Test Methodology
Values
Tensile Strength
ISO 527
43.5-45.5
Elongation at break
ISO 527
24-26%
Flexural Modulus
ISO 527
800-950Mpa
Flexural Strength
ISO 178
71.5-74.5Mpa
Impact Strength
ISO 180
43.5-44.5KJ/m2
Thermal Dynamic Properties
Test Methodology
Values
HDT@ 0.455 MPa(66 psi)
ISO 75
123C
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.
Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
Yes, we provide free standard ground shipping* on all orders over $350. For orders under $350, our standard shipping cost applies, which will be shown at checkout.
*Up to 20.99 off per shipment.
If you're not completely satisfied with your purchase, you can return it within 30 for a full refund minus shipping costs and restocking fees, unless item is made to order then the item is non-returnable. Please ensure the item is unused and in its original packaging.
We use 100% Eco Friendly Plant Based plastic, 90 % of our colors Made in the USA to the exception of our rainbow and gradiants which we buy from Asia since no USA manufacturer makes rainbow and gradiants. We use Made in America parts in our 3D printer farm, Mostly Microswiss and Slice Enginering parts.
When you choose OJAI3D you get exactly what you pay for we value quality over cost and choose to provide better quality instead of maximizing profit. We make very little on each product in order to offer affordable quality product made in America while also supporting a neurodivergent business model, We are a neurodivergent business employing autistic workers afterall.
