This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker
Feed your Printer the Filament of the Gods.
Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.
Feed your Printer the Filament of the Gods.
PPS-CF (Polyphenylene Sulfide - Carbon Fiber) filament offers superior industrial performance over standard materials like ABS, featuring extremely high heat resistance, exceptional chemical resistance, high stiffness, and low moisture absorption. It is a high-performance material ideal for harsh environments, providing superior dimensional stability, reduced warping, and greater strength, making it suitable for automotive and aerospace applications..
Arrives to you in a cardboard box, with filament wound in a polycarbonate spool, vacuum sealed with a desiccant bag.
Ambrosia Filament's Recommended Print Settings for our PPS-CF filament:
Attribute
Accepted Value(s) [Our Recommended Value]
Extruder Temperature
300-350 Degrees Celsius [340]
Heated Bed
90-110 Degrees Celsius [100]
Build Surface
PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan
0-40% range varies by cooling capabilities
Environmental Temperatures
40-120C [70C]
Soluble Support Materials
Technical Specifications for our PPS-CF Filament:
Physical Properties
Test Methodology
Values
Density
ISO1183
1.3-1.31 g/cm^3
Melt Flow Rate (250C/2.16KG)
ISO 1133
3-6 g/10min
Mechanical Properties
Test Methodology
Values
Tensile Strength
ISO 527
100-110 Mpa
Elongation at break
ISO 527
1-3%
Flexural Modulus
ISO 527
5500-6000 Mpa
Flexural Strength
ISO 178
170-180 Mpa
Impact Strength
ISO 180
25-30 KJ/m^2
Thermal Dynamic Properties
Test Methodology
Values
HDT@ 0.455 MPa(66 psi)
ISO 75
245C
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.
Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
Yes, we provide free standard ground shipping* on all orders over $350. For orders under $350, our standard shipping cost applies, which will be shown at checkout.
*Up to 20.99 off per shipment.
If you're not completely satisfied with your purchase, you can return it within 30 for a full refund minus shipping costs and restocking fees, unless item is made to order then the item is non-returnable. Please ensure the item is unused and in its original packaging.
We use 100% Eco Friendly Plant Based plastic, 90 % of our colors Made in the USA to the exception of our rainbow and gradiants which we buy from Asia since no USA manufacturer makes rainbow and gradiants. We use Made in America parts in our 3D printer farm, Mostly Microswiss and Slice Enginering parts.
When you choose OJAI3D you get exactly what you pay for we value quality over cost and choose to provide better quality instead of maximizing profit. We make very little on each product in order to offer affordable quality product made in America while also supporting a neurodivergent business model, We are a neurodivergent business employing autistic workers afterall.
