Skip to product information
1 of 1

West3D 3D Printing Supplies

Polymaker PolyMax PETG-ESD (Electrostatic Discharge Safe) Filament 3D Printer Filament .5KG 1.75mm

Polymaker PolyMax PETG-ESD (Electrostatic Discharge Safe) Filament 3D Printer Filament .5KG 1.75mm

Regular price $31.99 USD
Regular price $32.99 USD Sale price $31.99 USD
Sale Sold out
Color

According to information posted by the CDC - Carbon Nano Tubes (CNT), which this product contains, likely pose a significant health risk, particularly adverse lung effects and inflammation at relatively low-mass doses. Because of this- the use of proper filtration and respirators are required to use this product safely. 

PolyMax™ PETG-ESD offers better mechanical properties than any other regular PETG. Additionally the added carbon nanotubes makes it ESD safe.
ESD: Electrostatic discharge.

Printing Temperature: 250˚C - 290˚C
Bed Temperature: 70˚C - 80˚C
Printing Speed: 30mm/s - 50mm/s
Fan: 20%

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 65˚C for 6h
(Only if the material has absorbed moisture)

Do I need to use the cooling fan with PolyMax™ PETG?

If you are looking to produce the strongest part (high layer adhesion), we recommend to switch off your part cooling fan.
If you are looking for a high quality surface finish, we recommend to switch on your part cooling fan.

Usually the best of both worlds is to leave the part cooling fan at 20%.

0.5kg cardboard spool:
Spool Inner Hole Diameter: 55±1mm
Spool Diameter: 200±1mm
Spool Width: 65.6±2mm
Spool Weight: 190±7g

View full details

Frequently Asked Questions

Yes, we provide free standard ground shipping* on all orders over $350. For orders under $350, our standard shipping cost applies, which will be shown at checkout.

*Up to 20.99 off per shipment.

If you're not completely satisfied with your purchase, you can return it within 30 for a full refund minus shipping costs and restocking fees, unless item is made to order then the item is non-returnable. Please ensure the item is unused and in its original packaging.

We use 100% Eco Friendly Plant Based plastic, 90 % of our colors Made in the USA to the exception of our rainbow and gradiants which we buy from Asia since no USA manufacturer makes rainbow and gradiants. We use Made in America parts in our 3D printer farm, Mostly Microswiss and Slice Enginering parts.

When you choose OJAI3D you get exactly what you pay for we value quality over cost and choose to provide better quality instead of maximizing profit. We make very little on each product in order to offer affordable quality product made in America while also supporting a neurodivergent business model, We are a neurodivergent business employing autistic workers afterall.